To set things off on the proper foot – I do not like complexity when it is not necessary. I’ve noted many times that if energy were free and maintenance was not a consideration, the perfect light source is the tungsten halogen lamp. This technology delivers a very attractive white light, is very easy to control, provides optical focus, and is as simple as it can get. The low voltage versions of this technology are equally attractive, accepting that transformers were a horrible thing to tag onto an otherwise neat little light source. I have made hundreds of lights using halogen lamps, mainly 12V versions, starting back in 1985. It was my go-to light source. I still have boxes of transformers and sockets, acquired over years of making lights for myself and others.
Applying LEDs in efficient lighting designs is no more complex than use of any other source, just more productive, and attractive than CFL or other conventional “efficiency” improving sources.
That said, there is no escaping that energy is an issue, and maintenance is a pain. The cost of operating halogen technologies is simply impossible to bear. This is why we have HID sources with all their ugly liabilities, and the fluorescent lamp. While I get HID technology as a giant super-power halogen device, it has always been a clumsy, heavy, messy engineering gadget that sets aside the art of lighting for raw lumen energy. Fluorescent lamps have are a source you are forced to live with, in an uninspired, just-get-lumens-in -the-box sort of way. There is very little to love about their scale, lack of focus-ability, ballast hardware, delicate tubes, and ghastly glow. I’ve specified millions of these lamps into existence, wishing every time there was a better way. I never made a single art light using fluorescent lamps, not because itsn’t possible, but because I never liked them enough to give them that part of my time.
The emergence of solid-state lighting, specifically LEDs, hit me in two ways. One, I get the small controllable source I had with 12V halogen. Second, I get the efficiency and raw lumen potential of fluorescent that made it indispensable. Because of this, the last time I made a light using halogen technology was in 2004, and that product was converted to an LED sources in 2006. For my own use, every halogen light I made from 1993 to 2004 still in use around the house, has been converted to LED. Every new fixture made since 2005 has incorporated an LED light source, without exception. I do not use retrofit lamps. I either tear down and rebuild products to utilize LEDs properly, or design them around LEDs in the first place. (more…)
Complexity is the Nature of Technology Growth – Part Two: The SSL Perspective
Posted: December 12, 2013 in Art and Design, Energy, General Commentary, General SSL CommentaryTags: Home lighting, LED, LEDs, Lighting, Lighting facts, lighting facts label, Solid-state, Solid-state lighting, SSL
To set things off on the proper foot – I do not like complexity when it is not necessary. I’ve noted many times that if energy were free and maintenance was not a consideration, the perfect light source is the tungsten halogen lamp. This technology delivers a very attractive white light, is very easy to control, provides optical focus, and is as simple as it can get. The low voltage versions of this technology are equally attractive, accepting that transformers were a horrible thing to tag onto an otherwise neat little light source. I have made hundreds of lights using halogen lamps, mainly 12V versions, starting back in 1985. It was my go-to light source. I still have boxes of transformers and sockets, acquired over years of making lights for myself and others.
Applying LEDs in efficient lighting designs is no more complex than use of any other source, just more productive, and attractive than CFL or other conventional “efficiency” improving sources.
That said, there is no escaping that energy is an issue, and maintenance is a pain. The cost of operating halogen technologies is simply impossible to bear. This is why we have HID sources with all their ugly liabilities, and the fluorescent lamp. While I get HID technology as a giant super-power halogen device, it has always been a clumsy, heavy, messy engineering gadget that sets aside the art of lighting for raw lumen energy. Fluorescent lamps have are a source you are forced to live with, in an uninspired, just-get-lumens-in -the-box sort of way. There is very little to love about their scale, lack of focus-ability, ballast hardware, delicate tubes, and ghastly glow. I’ve specified millions of these lamps into existence, wishing every time there was a better way. I never made a single art light using fluorescent lamps, not because itsn’t possible, but because I never liked them enough to give them that part of my time.
The emergence of solid-state lighting, specifically LEDs, hit me in two ways. One, I get the small controllable source I had with 12V halogen. Second, I get the efficiency and raw lumen potential of fluorescent that made it indispensable. Because of this, the last time I made a light using halogen technology was in 2004, and that product was converted to an LED sources in 2006. For my own use, every halogen light I made from 1993 to 2004 still in use around the house, has been converted to LED. Every new fixture made since 2005 has incorporated an LED light source, without exception. I do not use retrofit lamps. I either tear down and rebuild products to utilize LEDs properly, or design them around LEDs in the first place. (more…)