YOL 2015 – D5 Techno Task Lighter

Posted: February 12, 2015 in YOL 2015
Tags: , , , , , ,
Overall height is 19". The base is a salvage item from Goowill.

Overall height is 19″. The base is a salvage item from Goodwill.

I am a task lighting fanatic. I use them everywhere, so am always looking for something new to add to my collection. In this installment, I am addressing the need for a light that is compact, delivers intense light (1,200+ Fc) with no glare or brightness, and high color accuracy. The application is pretty straightforward, from soldering station use where a magnifying glass is used, to fine detail work inside or on the outside of models.  For good measure, I also wanted it to aim at the wall as a photo fill light, or straight up as am ambient fill light, and have a dimmer to allow me to set whatever level I want for the application in hand at the moment.

The wiring and components are left skeletal.

The wiring and components are left skeletal.

With all the practical specifications set out, I decided to let this design be expressive of the gadgetry involved. Let it all hang out. I also decided to incorporate the new Bridgelux Vero LED with its integrated Molex connector, and a Nuventix cooler, just to amp up the tech factor.  This is where things got interesting. The Bridgelux array operates at 33.7V (500mA). The Nuventix cooler at 12V. I am powering the whole thing with a 24VDC wall wart power supply. That meant I needed to employ a boost driver for the LED and a buck (24VDC to 12VDC) power converter for the Nuventix cooler. I used Recom components to attain this, and used a cut up experimenters printed circuit board to connect these two to the power supply, the cooler, the LED and the dimmer control. That’s a lot of wires to find a path for, so I decided to leave them to roam free, let everyone see the components as well.

The lever on the left of the head is the on-off slide switch.

The lever on the left of the head is the on-off slide switch.

This is a style of design I personally enjoy, and have been doing since the 1980’s, where we made little 12V lamps with fiber optics, MR16s, halogen burners, or automotive headlamps, often suspended from structures made of building wire. In this case, the stand I found at a Goodwill. It was a table lamp, whose shade was gone, and socket was cracked. I liked the cast iron base and single post stand, so nabbed it for a dollar and tossed it in the pile with my other finds, waiting this moment to be put to service.

The wiring at the driver and power supply are exposed as well as the mess of wires leading into and out.

The wiring at the driver and power supply are exposed as well as the mess of wires leading into and out.

If you look at the head, the switch is a sliding action, on the left side of the head. Pull it forward to turn it on, push it back to shut it off. A hole in the side of the housing allows you to see the action inside. No, there is no reason for this, other than it seemed more appropriate than an off-shelf toggle or twist switch.

The light on the task surface is at 1,425 Fc, the LED is 3000K, 97CRI.

The head can pivot 180 degrees from down to straight up.

The head can pivot 180 degrees from down to straight up.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s